Repairing a Kinked or Damaged RV Water Hose
When an RV water hose becomes kinked, damaged, or otherwise unusable, the process of repairing it requires a few items and some simple instructions. With the right tools and materials, a kinked or damaged RV water hose can be repaired quickly, easily, and safely.
Parts and Tools Needed
To repair a kinked or damaged RV water hose, you will need the following items:
- A new RV water hose
- Fitting clamps
- A knife
- A screwdriver
- A pair of pliers
Step-by-Step Instructions
- Begin by shutting off the water supply to the RV water hose.
- Use a knife to cut the damaged section of the water hose.
- Remove the fitting clamps from the ends of the hose and discard them.
- Insert the new RV water hose into the fitting clamps and use a screwdriver to secure the clamps in place.
- Use a pair of pliers to tighten the fitting clamps onto the new hose firmly.
- Turn on the water supply to test the repaired RV water hose.
Safety Tips
When repairing an RV water hose, safety should always be a priority. If you are uncomfortable completing the repair yourself, it is recommended that you just buy a new water hose.
RV Issues That Require Similar Attention
RV owners can also face other common issues that require similar attention, such as:
- Replacing a cracked RV water hose
- Replacing a leaking RV water hose
- Fixing a frozen RV water hose