Fixing a Bent RV Door Jamb
No one wants to open their RV door to find the jamb bent or out of shape. Unfortunately, this can happen and will require some serious work to get it back in proper shape. However, with the right tools and proper knowledge, it can be done!
Related RV Issues
Having other issues with your RV door jamb? Here are a few similar but unrelated questions to ask yourself:
- Is my RV door sticking?
- Is the RV door out of alignment?
- Is my motorhome door handle loose?
Parts and Tools Needed
To get your RV door jamb back in shape, you’ll need the following parts and tools:
- Hammer
- Pry bar
- Replacement door jamb
- Screwdriver
- Wood shims
- Wood glue
- Nails
- Level
- Caulk
Instructions
- Start by removing the screws from the door frame and carefully take it off.
- Inspect the frame to see if it can be salvaged or if it needs to be replaced. If you need to replace it, make sure the new frame is the same size and shape as the old one.
- Insert the frame back into place, making sure it is level and stable. Secure with nails or screws.
- Caulk around the edges of the frame to ensure a tight seal.
- Attach the wood shims at the top, sides, and bottom of the frame to make sure it is properly aligned.
- Use wood glue to secure any loose pieces of wood that may have been knocked out of place.
- Reattach the door using the screws, then check to make sure it opens and closes properly.
Safety Tips
While replacing an RV door jamb is a relatively simple job, it is always best to hire a professional when dealing with any type of structural repairs on an RV. They will have the experience and knowledge to get the job done quickly and safely.
Alternate Choice
If you have exhausted all option with trying to fix the bent jam, it might be best just to get a new door. You need to have a safe and secure closure for you and your family. Try one like this:
